Kongto Technology Co.,LTD Provide professional CNC monitor repair solutions
  • Mitsubishi EUM-1491A display repair replacement,14" Industrial Monitor
    {{16}}%
    OFF
    $  450.00 $  380.00

    Detailed Product DescriptionMitsubishi EUM-1491A CRT display series LCD perfect substituteMDA, CGA, EGA standard pin definitions (monochrome or multicolor):    1, GND (in) 2, GND (in) 3, NC (null) 4, NC (null) 5, NC (null) 6, the INTENSITY (brightness), TTL level 7, the VIDEO (video) TTL level 8, the H-SYNC (synchronous) TTL level 9, the V-SYNC (synchronous) TTL level MDA display standard: MDA standard is the first company to develop a standard IBM PC video display. It only supports the character

  • Fanuc a61l-0001-0076  display
    {{33}}%
    OFF
    $  450.00 $  300.00

    This LCD can be compatible to replace the following FANUC System CRT:A61L-0001-0092,A61L-0001-0086,A61L-0001-0076A61l-0001-0092 and a61l-0001-0086 were produced in the middle and late 1980s. It is widely used in various FANUC systems, such as 10, 10t, 11 and 11m series displays. This 9 "monochrome CRT display was first installed on the early fanaco 10 series control system.Produced in the mid-1980s, a61l-0001-0076 is a 9-inch green monochrome display installed on FANUC 6T, 6b, 6m, 6MB, 6tb, 6mbii and 6tbii control systems.Fanuc-CRT MDT-947 A61L-0001-0086  "9"" Color CRT Monitor,

  • GBS-8219 CNC Monitor Replacement  RGB TO VGA Video Converter
    {{17}}%
    OFF
    $  180.00 $  150.00

    Detailed Product DescriptionHigh Light:GBS8219, GBS-8219, RGB TO VGAGBS8219 XVGA BOX/RGB to VGA , RGBS to VGA ,RGBHV to VGAThis device is mainly used for industrial use , if you have industrial device with old Monitor , but the monitor is already broken , then what is the best way to get the industrial device to work ? replace the new system ?  NO!! the industrial device cost is thousands of Dollars at least , you just need to purchase this and then connect to LCD or VGA device , the problem would be solved !! GBS8219  in the following industrial equipment replacement

  • RGB  MDA CGA EGA to VGA     KT-809 industrial video converter
    {{19}}%
    OFF
    $  185.00 $  150.00

    RGB, MDA, CGA,EGA to VGA Converter(MODEL KT-809)   OperationManual VERSION2.02010-08  KT-809 is based on the oldindustrial video converter launch of an innovative industrial Video Converter, KT-809industrial video converter of industrial fully automated operation.  Quick reference for KT-809:  Input Signal   Type MDA, CGA, EGA, RGB, RGB Sog, RGBS, RGBHV, YPbPr, Mono/Colour Interface 9 PIN, 3 PIN, 5 PIN, 6 PIN, 7 PIN, 15 PIN, 20 PIN, 24 PIN, 25 PIN, BNC port… Parameter Analog: 0.5-1.0 / TTL: 0.2-5.0V 75 ohm / 750 ohm

  • Mazak CNC   Monitor CD1472-D1M  DR5614  14-inch CRT to LCD solution
    {{16}}%
    OFF
    $  450.00 $  380.00

    Mazak system dedicated model (color display)Suitable for CD1472-D1M 14-inch color CRT in Japan's Yamazaki Mazak Mazak M-32 and other systemsDirect replacement of LCD, plug and play, install in original position.

  • Siemens Monitor SINUMERIK 6FC3998-7FA20 Siemens-SM0901  9 MONOCHROME 579417 TA
    {{16}}%
    OFF
    $  450.00 $  380.00

    Detailed Product DescriptionMode:6FC4600-0AR04Panel:LCDSiemens Monitor 6FC3998-7FA20  6FC4600-0AR04Siemens-SM0901 579417TA-LCDSiemens Monitor-6FC4600-0AR04Siemens Monitor 6FC4600-0AR04 , is one of the mid generation of Siemens 12″ crt monitor display.. It was fitted on the Siemens CNC special 805 control systems (automobile industry). The 6FC4600-0AR04 is a 12″ Colour monitor.Replacement Specifications: type: LCD4600 Siemens Monitor 6FC4600-0AR04 CRT replacement,AUO industrial LCD panel,1 BNC signal connector,AC85-265V power supply ,separate OSD keys,easy to mount and

  • KME 26C12F30BAX Industrial Monitor
    {{0}}%
    OFF
    $  0.00 $  450.00

    Detailed Product DescriptionThe KME control displays originated in the British KME company, KME company with embedded display and color CRT display panel in the UK ROCHESTER. KME LCD industry:industrial grade AUO LCD panel, high brightness, high contrast, wide viewing angle signal interface connector: 9 pin signal power supply: AC85-265V KME power 26C12F30BAX 12"color monitorSignal connector: 9 pin signalKME 26C12F30BAX liquid crystal

  • Toshiba Monitor D9MM-11A A61L-0001-0093 4MDB059G
    {{17}}%
    OFF
    $  180.00 $  150.00

    Detailed Product DescriptionToshiba Monitor D9MM-11AD9MM-11A  Monitor, is from c.1992 onwards. The Toshiba monitor was fitted on the Fanuc system 16, 18, 20 and 21 series controls, including the 18T and 16-MA variations of Fanuc controls. The Toshiba Monitor D9MM-11A is a 9 inch amber monitor utilised in the machine tool for basic level operator observation and control system alteration.Replacement Specifications: type: 8.4″Toshiba LCD D9MM-11A, MITSUBISHI industrial LCD panel,HONDA 20 pin signal connector,AC 100-240V power supply ,easy to mount and setup.The successful application

  • Siemens SINUMERIK 810M  810T  810G system 3T 3TT 3M 3G controls Magnetek Monitor 579417TA Siemens Monitor SC-1200 SINUMERIK SM-0901 6FC3988-7FA20
    {{16}}%
    OFF
    $  450.00 $  380.00

    Detailed Product DescriptionLCD Size:8.4Signal Interface:16-PINPower Supply:AC110-240VSiemens Monitor SC-1200,SINUMERIK 810M monitor,SINUMERIK 820 monitor  SC-1200 Siemens Monitor: is one of the late generation of Siemens crt monitors display.. It was fitted on the Siemens CNC late 810, 820, 840 control systems. The SC-1200 is a 12″ Colour monitor.Replacement Specifications: type: LCD1200 Siemens Monitor SC-1200 CRT replacement, SHARP industrial LCD panel,16 PIN signal connector,AC85-265V power supply ,separate OSD keys,easy to mount and setup.Siemens Monitor SC-1200 mono crt

  • Hitachi 14inch Monitor CD1472D1M2-M K265051
    {{0}}%
    OFF
    $  0.00 $  380.00

    Hitachi 14inch Monitor CD1472D1M2-M K265051Brand: HitachiType: 14inch MonitorModel: CD1472D1M2-M K265051Country Of Manufacturer: Japan This is for replace LCD monitor Replace the display effect after :

  • Mazak Monitor 8DSP40
    {{0}}%
    OFF
    $  0.00 $  380.00

    Detailed Product DescriptionMazak Monitor 8DSP40Mazak Monitor 8DSP408DSP40 Mazak monitor, is a relatively new generation Sharp CNC monitor, that was fitted on theMazak / Mitsubishi Quickturn Controls, as well as Yamazaki, Mazatrol machines utilising Mitsubishi control systems. The 8DSP40 is a 14 Colour Display CRT.Replacement Specifications: LCD8DSP40 MAZAK CNC system A1QA8DSP40 CRT replacement, SHARP industrial LCD panel, 15 pin signal connector,AC85-265V power supply , separate OSD keys, easy to mount and setup. 

  • Matsushita KF-M7099H A61L-0001-0093 Monitor
    {{0}}%
    OFF
    $  0.00 $  180.00

    Detailed Product Description This product is for industrial LCD monitors, used to replace the old CRT monitorsMatsushita KF-M7099H A61L-0001-0093   "9"" Color CRT Monitor, Fanuc 16, 18 and 20 Series Control Plug and play, no need to debug, mounting holes, data interface, power lines exactly match the original display!FANUC 9 CRT (A61L-0001-0093) MDT947B-2B, produced in the mid-1990s, is widely used in various FANUC systems, such as: 0-TC, 0-MC, 16T, 18T, 16M, 18M, 21T, 0-TD, 0-MD system displays. A61L-0001-0093 is a 9-inch amber single display with dual-frequency support. After

  • Mitsubishi display JUM-1483 JUM-1482A
    {{0}}%
    OFF
    $  0.00 $  380.00

    JUM-1483 JUM-1482A JUM-1483A D-SUB display interface, signal line as the six signal pin, used in some Japanese printing equipment, because the JUM-1482A display after working for a long time, has been unable to work properly, the JUM-1482A display case renovation replacement process. JUM-1482A 9 pin display Figure;JUM-1483 JUM-1482A JUM-1483A six signal pin:Alternative ----KTV148 special display JUM-1483 JUM-1482A JUM-1483A

  • Matsushita TX-1424AB Monitor A61L-0001-0074  TX-1424AB-PZRT C14C-1472DF
    {{16}}%
    OFF
    $  450.00 $  380.00

    Detailed Product Description Matsushita TX-1424AB MonitorBrand: MatsushitaType: 14inch MonitorModel:  TX-1424AB MonitorCountry Of Manufacturer: JapanThis is for replace LCD monitor Replace the display effect after :Fanuc 10T Monitor

  • Matsushita TX-1450ABA5 A61L-0001-0094#A Industrial Liquid Crystal Display
    {{16}}%
    OFF
    $  450.00 $  380.00

    Fanuc monitor A61L-0001-0094, A61L-0001-0094#A,C14C-1472D1F-A,TX-1450AB5,A02B-0094-C041 Liquid crystal substitution  Matsushita TX-1450AB5 MonitorBrand: MatsushitaType: 14inch MonitorModel: TX-1450AB5Country Of Manufacturer: JapanThis is for replace LCD monitor Replace the display effect after :

  • TOTOKU BKO-NC6225, MDT1283B-1A, MDT1283B-02,MAZATROL Display
    {{0}}%
    OFF
    $  0.00 $  380.00

    MDT1283B display 12.1 inch CRT, often used in Mazak system, such as Japan Toshiba system.                                                                               mdt-1283B                       mdt-1283-crtMDT-1283B signal identification: The implementation of the project: the original MDT-1283B six

  • {{ item.displayed_price.unit_prefix }}  {{ item.displayed_price.min }}

view {{page_size}}

view more
loading
no more data
No results
Filter

{{cate.name}}

Currency: USD
USD - US Dollar
EUR - Euro
GBP - British Pound
CAD - Canada Dollars
AUD - Australia Dollars
JPY - Japan Yen
SEK - Sweden Kronor
NOK - Norway Kroner
IDR - Indonesia Rupiahs
BRL - Brazil Reais
RUB - Russia Rubles
THB - Thailand Baht
AED - Arab Emir. Dirham
Need Help?
Chat live with us
Request Quote
Want to call?

13686889647

WhatsApp
Track Order
Want to check the status of your order? You can put in your order number and click track order to find the tracking information or login your account to check the detail information.
order number
  • order number
  • tracking number